Saw Blade Use Requirements

1. When working, the workpiece should be fixed, and the profile positioning should conform to the direction of the knife, so as to avoid abnormal cutting. Do not apply side pressure or curve cutting. The knife should be fed smoothly, so as to avoid the impact of the blade on the workpiece, which will cause damage to the saw blade or the workpiece. Fly out, accident happens.
2. When working, if you find abnormal sound and vibration, rough cutting surface, or peculiar smell, you must stop the operation immediately, check in time, and troubleshoot to avoid accidents.
⒊When starting cutting and stopping cutting, do not feed the tool too fast to avoid broken teeth and damage.
4. If cutting aluminum alloy or other metals, use a special cooling lubricant to prevent the saw blade from overheating, causing paste, and other damages, which will affect the cutting quality.
⒌The chip flute and slag suction device of the equipment should be ensured to be unblocked to prevent slag from forming into blocks, affecting production and safety.
6. When dry cutting, please do not cut continuously for a long time, so as not to affect the service life and cutting effect of the saw blade; wet film cutting should be cut with water to prevent leakage.