Cutting Depth Of Diamond Saw Blade

The sawing depth is an important parameter related to diamond wear, effective sawing, force on the saw blade and the nature of the stone being sawed. Generally speaking, when the linear speed of the diamond circular saw blade is high, a small cutting depth should be selected. From a technical point of view, the diamond sawing depth can be selected between 1mm and 10mm. Usually, when sawing granite blocks with a large-diameter saw blade, the sawing depth can be controlled between 1 mm and 2 mm, and the feed speed should be reduced at the same time. When the linear speed of the diamond circular saw blade is high, a large cutting depth should be selected. However, within the permissible range of saw machine performance and tool strength, a larger cutting concentration should be used for cutting to improve cutting efficiency. When there is a requirement for the machined surface, a small depth of cutting should be used.