Knowledge

Introduction to woodworking saw blades

Woodworking saw blades are generally made of carbon tool steel, and there are two commonly used grades: T9 and T10. (That is, carbon steel with a carbon content of approximately 0.

Saw Blade Aperture Selection

The aperture is a relatively simple parameter, which is mainly selected according to the requirements of the equipment, but in order to maintain the stability of the saw blade, it

Selection of saw blade sawtooth angle

The angle parameters of the sawtooth part are more complicated and the most professional, and the correct selection of the angle parameters of the saw blade is the key to determine

Selection of saw blade tooth shape

Commonly used tooth shapes include left and right teeth (alternate teeth), flat teeth, ladder flat teeth (high and low teeth), inverted trapezoidal teeth (inverted tapered teeth),

Selection of saw blade thickness

The thickness of the saw blade In theory, we hope that the thinner the saw blade, the better.

Selection of number of saw blade teeth

The number of teeth of the sawtooth, generally speaking, the more the number of teeth, the more cutting edges per unit time, the better the cutting performance.

Selection of saw blade diameter

The diameter of the saw blade is related to the sawing equipment used and the thickness of the sawed workpiece.

Saw blade substrate selection

65Mn spring steel has good elasticity and plasticity, economical material, good heat treatment hardenability, low heating temperature, easy deformation, and can be used for saw bla

Selection of carbide types for saw blades

Commonly used types of cemented carbide are tungsten-cobalt (code YG) and tungsten-titanium (code YT).