Professional Solid Woodworking Saw Blade

Professional Solid Woodworking Saw Blade

Analysis of common states and causes of poorly cut saw blades - crushing and chipping of the cutting head

Possible causes are:
1. The saw blade is poorly welded and the cutter head is dropped, and the cutter head is stuck in the saw path;
2. Poor welding, welding cracks in the cutting head, cracked after cutting under force;
3. The saw blade has been subjected to abnormal collision with the teeth during storage or installation;
4. The design of the knife head has insufficient collapse resistance and is easy to collapse.

Analysis of common states and causes of poorly cut saw blades - head drop

Reason: Low welding strength
1. The welding temperature and time parameters are unreasonable;
2. Poor welding adjustment;
3. Poor tooth opening, insufficient tooth opening or missing tooth;
4. After poor welding, the tooth seat before welding rework is not treated in place (there is still an oxide layer on the surface)

Analysis of common states and causes of poorly cut saw blades-Broken teeth

Possible causes:
1. Microcracks caused by heat treatment;
2. Poor welding tempering, high tooth back hardness and poor toughness;
3. The cutting force is too large (not polished in time).
 

Precautions for the use of saw blades

When the tool is misoperated, it may cause tool breakage, fragments, and personal injury accidents caused by the scattering of cutting materials. Before use, you must carefully read [Precautions for Use] and [Instructions for Using Tools].
Precautions for use
Before use: must be used in accordance with the requirements of the machine instruction manual. Select the saw blade product that matches the cutting material. Check whether the tooth tip is damaged, falling off, abnormal wear and other phenomena. Check the saw blade matrix (body) for abnormal wear, cracks, deformation, bending and other phenomena. Confirm that the cooling medium is suitable and sufficient.
Installation: This product has a sharp tip. The tip protection hose, etc. is to prevent injury accidents and avoid damage to the knife tip, so please remove it after installation. The flange should be clean, free of wear and tear, and the tool should be installed in the correct running direction. Please ensure that the mounting surface is free of scratches, bends and wear, and clean the machine and knives before use. After installation, let the machine idle, confirm whether there are tools swinging, machine vibration and abnormal noise, etc., confirm whether the cooling spraying is normal, including whether the spraying position is in the tooth.
In use: According to the Occupational Safety and Health Act, please use a safety cover, wear safety shoes, and wear protective glasses. During use, when abnormal noise and vibration are found, rough cutting surface and bending are found, the operation must be stopped immediately, checked in time, and eliminated. Do not touch the rotating saw blade, danger!
After use: When the saw blade is no longer sharp, please entrust a reliable professional manufacturer for repair. The adhesion on the saw blade may affect the performance of the product and must be cleaned up in time, otherwise it may cause the performance of the product to be reduced and cause safety accidents.
 

Product Details:

Packing&delivery:

Packaging details:plastic bag,small pack,carton,pallet,or as your request.

Product Description:

Application: solid wood

Hot Tags: professional solid woodworking saw blade, China professional solid woodworking saw blade manufacturers, suppliers, factory