Superior High Quality Dry Cutting Saw Blade
Stock Name:Iron Products
Specification model: 100×3.0×2.5×32×36p
Electroplating:N
Sealant:N
Angle: -6/0/10/30
Blade type: BW
Sandblasting:Y
Positioning hole:4/5.5/50
Keyway:Double 8*3.4
Application: Dry cutting saw, cutting hinge
Buried plug: N
Production cycle: 15 days
Urgent: 7-15 days
Supply Ability ：10000 Piece/Pieces per month
Customized support：OEM,OEC
Brand Name:WAGEN
Advantage:High speed cut & super long life
Quality Grade:Industria
OEM:Available
Description
Superior High Quality Dry Cutting Saw Blade
The blade of a dry cutting saw is also a type of cold saw.
Cold saw installation points
Saw blade installation area and flange surface cleaning (remove internal iron filings and tungsten steel sheet foreign matter)
The saw blade is light to handle (the saw blade must be rotated counterclockwise before locking to remove the positioning gap)
Cover the protective cover, tighten it appropriately, and check the gap between the tungsten steel sheet and the saw blade body on the inside and outside
Adjust the position of the brush (cover at least 3/4 of the blade head.)
Start the device and idle for 3 minutes (if the equipment is not injected at this time, stop and spray down)
The first knife cutting must leave enough material head (recommended≥ 50 mm)
If the sound is abnormal, check the cause (saw blade, material, equipment, etc. one by one)
Clean the iron filings at the steel brush regularly, and adjust the position of the steel brush regularly
Recommended parameters for cold sawing processing
Carbon steel/low alloy steel: hardness within 15HRC, carbon content within 45%, such as 20 steel, 40Cr steel, etc
THE SPEED AND FEED NEED TO BE INCREASED, SUCH AS 285 COLD SAW, THE SPEED IS 100~135RPM, AND THE FEED VOLUME IS 0.04~0.08 MM/T
Medium and high carbon alloy steel: hardness above 15HRC, carbon content within 40%, such as GCr15, 42CrMo, etc
THE SPEED IS GENERAL, THE FEED IS GENERAL, SUCH AS 285 COLD SAW, THE SPEED IS 95~120RPM, AND THE FEED AMOUNT IS 0.03~0.05 MM/T
Stainless steel: such as SU304, SUS316, etc
THE SPEED IS SLOW, THE FEED RATE IS GENERAL, SUCH AS 285 COLD SAW, THE SPEED IS 60~85RPM, AND THE FEED AMOUNT IS 0.035~0.05 MM/T
Specific parameters need to be debugged in combination with actual users.
Product Details:
|
Product Name |
Iron Products |
|
Inventory Name |
Superior High Quality Dry Cutting Saw Blade |
|
Specification Model |
100×3.0×2.5×32×36p |
|
MOQ |
6 pcs, small order is available |
| Electroplating | N |
|
Sealant |
N |
| Angle | -6/0/10/30 |
| Blade type | BT |
| Sandblasting | Y |
|
Sealing |
N |
|
Positioning hole |
4/5.5/50 |
| Keyway | Double 8*3.4 |
| Use | Dry cutting saw, cutting hinge |
| Buried bolt | N |
| Production | 15 days |
| Expedited | 7-15 days |
| Supply Ability | 10,000 Pieces /per month |
| Customized support | OEM,OEC |
| Advantage | High speed cut & super long life |
Packing&delivery:
Packaging details:plastic bag,small pack,carton,pallet,or as your request.
Product Description:
Application: Dry cutting saw, cutting hinge
Hot Tags: superior high quality dry cutting saw blade, China superior high quality dry cutting saw blade manufacturers, suppliers, factory
